PIQAPART Node

PIQAPART Node sensors: where you need them, how you need them.

PIQAPART Node units are the devices that connect to PIQAPART Core: LightBox, overhead cameras and PIQAPART P2L devices. They capture images and data on the line and in the warehouse, run the AI on the edge and send everything to the platform. Every configuration is sized to your production process.

PIQAPART LightBox with touchscreen for counting and quality control at the bench
The devices

Three device families, one platform.

PIQAPART Node units are the hardware devices that interface with PIQAPART Core: LightBoxes, cameras, PIQAPART P2L devices and other types of sensors. Every PIQAPART Node is sized and custom-designed around the needs of the customer and the production process.

PIQAPART LightBox: component check before packing, with the result on a monitor and tablet

LightBox

PIQAPART Count · PIQAPART Quality

Enclosed station with controlled lighting, for counting, identification and quality control of parts and kits.

PIQAPART overhead camera mounted on a profile above the workstation

Overhead cameras

PIQAPART Assembly · PIQAPART Count · PIQAPART Quality

High-resolution cameras above benches, belts and roller conveyors, or on the ceiling, for large parts, kits and assembly.

PIQAPART P2L device: the controller that drives the Pick to Light LED strips

PIQAPART P2L device

PIQAPART P2L

Wi-Fi controller that drives the LED strips on the shelving, for light-guided picking.

LightBox

An image-capture station with controlled lighting.

The LightBox guarantees consistent images whatever the lighting in the department: it is the basis for repeatable, comparable checks. It is designed for identification, counting and quality control: it counts even interlocked components, such as springs, or partially overlapping ones, checks that a kit is complete and verifies the presence and position of O-rings, seals and holes.

High-precision cameras

Available in several resolutions, 2MP, 13MP, 32MP or 48MP, chosen according to the parts and the level of detail to check.

Small, medium or custom

Two standard sizes or a LightBox designed around the dimensions of your parts.

At the bench or on the line

Used at the bench, or integrated on roller and belt conveyors.

Touchscreen at the station

The operator sees the check result within moments, even in Standalone mode.

Operator placing parts in the PIQAPART LightBox
Assembly bench with a PIQAPART overhead camera and monitor

A typical station

A PIQAPART Assembly station with an overhead camera:

Overhead cameras

Above the bench, the belt or on the ceiling.

Overhead cameras check what doesn’t fit in a LightBox: large parts, complete kits, assembly stations and work areas. A single camera above an existing bench or line is enough to turn it into an AI inspection station.

No enclosure

Works above the existing bench or line, with no guarding. Ceiling-mounted, it also covers large areas.

Tolerant to lighting

The AI models compensate for imperfect, changing ambient light.

Parts in any position

The operator places the parts in any position or orientation: the AI finds them.

More items, same hardware

A single station handles many items, each with its own model trained on its defects.

PIQAPART Node overhead camera on a tall, compact gantry above a production line conveyor belt

Above the production line

A PIQAPART Node camera mounted above a belt or roller conveyor inspects, identifies and counts moving parts.

Array of PIQAPART Node cameras fixed to the ceiling beams, viewing a large warehouse area with pallets and a forklift from above

Ceiling-mounted over warehouse areas

Several ceiling cameras cover large areas to count and track pallets moved by forklifts.

PIQAPART P2L device

The controller that lights up the right spot.

The PIQAPART P2L device is a Wi-Fi-connected microcontroller that drives the LED strips of the PIQAPART P2L (Pick to Light) module on warehouse shelving, with real-time updates from PIQAPART Core.

USB 5V power

From a mains adapter or a power bank. No batteries to replace.

A single connector

The LED strip connects with a dedicated connector that carries both power and data.

Daisy-chaining

Several devices daisy-chained and powered from a single source.

Custom LED strips

Adhesive, cuttable and addressable LED by LED; they even fit inside industrial profiles.

PIQAPART P2L device: the controller that drives the Pick to Light LED strips
PIQAPART P2L addressable LED strip fitted in an industrial aluminium profile
Architecture

From PIQAPART Node to PIQAPART Core, and back.

The AI runs on the PIQAPART Node, at the workstation. Every PIQAPART Node sends images, results and new defects to PIQAPART Core in real time; PIQAPART Core uses them to retrain and validate the models and redistributes them to every PIQAPART Node. With ERP, MES and WMS, data flows both ways: orders and master data in, results, counts and photographic evidence out.

PIQAPART architecture: PIQAPART Node sensors at the workstation, PIQAPART Core platform, web dashboard and integration with ERP, MES, WMS and PLC
01

On-edge inference

Real-time results with zero latency, on every bench or belt.

02

Continuous improvement

Collection, retraining, validation and deployment: with every cycle the models become more accurate.

03

Secure communication

Between the PIQAPART Node units and PIQAPART Core, data travels over VPN tunnels and HTTPS.

Deployment modes

The same PIQAPART Node, three ways of working.

01

Standalone

The AI runs on the PIQAPART Node and the result appears on the local touchscreen. The model is preloaded and managed by GETCOO; no connection to PIQAPART Core: it works even in isolated environments.

02

Cloud

Models and PIQAPART Node units managed centrally, with logs, images and results in one place and web access from anywhere. It scales from a single station to multiple lines and plants.

03

On-premise

PIQAPART Core installed on your premises, integrated with your IT infrastructure and with ERP, MES and WMS: maximum data control, for environments with compliance requirements.

Open hardware

Proprietary software, standard hardware.

Custom-sized

Every PIQAPART Node is sized and designed around the needs of the customer and the production process.

Standard hardware

Standard industrial PCs, with or without a GPU: no lock-in to a hardware vendor.

Proprietary software

AI pipelines and models developed by GETCOO, with no dependence on third-party vision platforms.

Which PIQAPART Node does your line need?

Send us a few samples: we’ll test them in our laboratory and propose the most suitable configuration.

Request a consultation

We’ll get back to you to understand your process. If needed, we’ll ask you for a few samples to test in our laboratory.